Helpful Pointers for Cleaning a Fuel Injector

Fuel injectors that are dirty can cause clogging and can result in various engine issues that include a decline in fuel economy, dirty emissions or worse performance. Fuel injectors can be cleaned either while they are in the car or when taken out. Usually, it’s sufficient to clean the infectors while they are in the vehicle. The following are some information and suggestions for cleaning the fuel injectors of your car.

Causes of Injector Contamination

Carbon deposits are formed on the injectors of your car. This is caused by the process called “coking” wherein the left fuel on the tips is baked on as engine heat increases as it stops running with the coolant no longer circulating. Such deposits stay on the tips of the injector and build up every time your car is heated after driving it.

 

How to Prevent Deposits

There is not much that you can do about preventing the build-up of fuel injector carbon. This naturally occurs during the operation of the engine. These deposits can be cleaned or an injector cleaner additive can be used. However, you need to remember that while additives are capable of minimizing carbon buildup, such may worsen deposits on the valves of the engine.

The Right Time to Clean the Fuel Injector

You cannot predict the frequency of the buildup of injector contamination. You can determine it based on how frequent you operate your vehicle. Every time you drive your car and turn it off, you can expect the buildup of more contamination. Generally, what you can do is to watch for your car’s emissions control or performance level to start dropping. You may not have an idea about such buildup unless you let a car repair mechanic run an engine test to your car.

Cleaning the Injector of your Car

In order to clean the fuel injector, make sure that you disconnect the injector from the fuel pump so that you can remove any flammable gasoline residue left on your injector. Also, you can minimize the possibility of explosion if you take the gas cap off as the injector cleaner may shoot solvent into it. Click here to learn more about the best fuel injector cleaner in the market today. Make sure that you properly read the instructions stipulated on your fuel injector cleaner. After you remove the gas cap, you can attach the cleaner to the injector. After the suggested time has elapsed, the engine of the car must be turned off. Then, you need to remove the fuel injector cleaner, put the fuel pump back and put on the gas back before starting your engine again. In order to check for unusual noises which could come from your injectors, test drive your car.

Important Points to Ponder About Fuel Injectors

Fuel injectors are a valve that is electronically controlled. The fuel pump supplies fuel in a pressurized way to the fuel injector. When energized it atomizes the fuel into a fine mist that can be easily burned by the engine’s vehicle. It is mounted in the intake manifold so that it makes it easy for the fuel to be sprayed directly at the intake valves. There is a fuel supply rail that helps in connecting all fuel injectors to the fuel supply.

This fuel injection system is quite an important part of your engine. They do their job without much maintenance required other than cleaning of the fuel injectors. For this specialized cleaners are available and you can select your own best injector cleaner. A failing fuel injector illuminates MIL and due to this the engine may run too rich or lean that can further lead to loss of power or a misfire.

Common Causes of Failure:

Fuel injectors require proper fuel filter maintenance and if not done properly may lead to a debris deposit on it. Moreover, if the fuel quality is not appropriate, it is also a major problem for the malfunctioning of a fuel injector. Fuel of low quality often results in a deposit on the injector thus it disrupts the fuel spray pattern.  

How Long Do Fuel Injectors Last?

Those who are driving experts may notice a difference in driving if the fuel injector is not functioning properly. Faulty fuel injectors may lead to engine damage however, you can usually fix the issue if proper care is done.

On some late model cares especially it will indicate the presence of a faulty fuel injector by causing a cylinder to misfire. This is due to the fact that on newer fuel injection systems the injector works in a line with other procedures. When the engine overlooks a dose of fuel, it then won’t be able to run as smooth as before and may suffer great damage overtime.

Faulty injectors can’t be ignored for long and some treatment must be done to get it correct as soon as possible for the betterment of your vehicle.

Tasks that Makes Standard Fuel Injectors the Best

• Combination of Stainless steel calibration slide and spring helps in preventing corrosion that will lead to an absolute service life.
• Standard flow matched injectors supports smooth engine operation
• Spruced solenoid windings and precision wound helps in proficient fuel delivery These are some of the steps following which one can keep your car fuel injectors running at their best.